Soil nailing uses grouted, tension-resisting steel elements (nails) to reinforce in situ soils and creating a gravity retaining wall for permanent or temporary excavation support.
Soil nail walls are generally constructed from the top down. Typically, soil is excavated in three to six feet deep stages. After each excavation stage, near-horizontal holes are drilled into the exposed face at typically three to six foot centres. Tension-resisting steel bars are inserted into the holes and grouted in place. A drainage system is installed on the exposed face, followed by the application of reinforced shotcrete wall facing. Precast face panels can also be used. Bearing plates are then fixed to the heads of the soil nails. This installation process is repeated until the design wall depth is reached. The finished soil nails then produce a zone of reinforced ground.
Keller has been installing and developing soil nailing techniques for many years. We use specialized equipment and experienced crews and employ strict quality control measures to ensure uniform and consistent results. Keller has used extensive 3D modeling to avoid conflicts between soil nails and other earth retention systems and to avoid buried utilities.